Cut kWh per unit produced. Without a plant shutdown.
Load curves, power factor penalties, DG runtime and tariff optimisation — one dashboard per plant, benchmarks across plants.
Benchmarked in kWh/unit produced · No card required
What breaks — and what we do about it
Today
Your PF drops below 0.9 and you find out only when the DISCOM adds ₹40K to next month's bill.
With Energy Intelligence
Live PF tracking with instant alerts. Fix before the billing cycle closes.
Today
Maximum demand spikes 15% above sanctioned load twice a month — every spike is a penalty.
With Energy Intelligence
Peak alerts + load-shift recommendations. Stagger big loads to stay under contract demand.
Today
You can't tell if your compressor overhaul made a real difference, or if it was just cooler weather.
With Energy Intelligence
Normalised kWh/unit produced — apples to apples across seasons and shifts.
Today
BEE PAT filing eats a fortnight of your energy manager's time every year.
With Energy Intelligence
PAT-ready report auto-generated from your live data. Export as PDF, submit, done.
Built for plants
kWh / unit produced
Specific Energy Consumption per line, per shift, per SKU. Drift shows up before management asks.
Power factor watch
PF tracked every reading. Alerts before penalties. Suggested capacitor sizing built in.
Load curve analysis
See where your MD peaks are. Time-of-day tariff optimisation on TOD-billed connections.
BEE PAT reporting
Designated Consumer? Export your yearly performance report in the exact BEE template.
Multi-plant benchmarking
Which plant runs 20% higher SEC than the peer average? We surface the outlier every Monday.
Solar + DG apportionment
Rooftop solar generation, DG hours and grid mix — attribute every kWh to the right source.
What typical looks like
8-12% SEC reduction typical inside 90 days
For a mid-sized textile mill (3 MW connected load), that's ~₹18-25 lakh/year — mostly from PF correction, MD staggering and identifying rogue compressors. No capex required.
Try it on your dataComing with our IoT hardware
Real-time monitoring, no meter walks
Our upcoming WeAutomate smart meter reads at 1-min granularity per motor. Skip the manual meter walks — every compressor, every chiller, every HT connection reports live. Auto-provisioned on this platform when you plug it in.
Common questions
We already have SCADA. Why add this?+
SCADA is for operating the plant, not for cost analytics. We layer on top — pull your kWh (from bills or meters) and turn it into a per-unit, per-shift, per-plant view your CFO can read.
Is this only for large factories?+
No. Our platform starts at ~5 plants / ₹5K per month. Bigger plants (HT connections, contract demand >1 MW) get more value, but even small food-processing units use the PF and MD alerts.
How do you handle multiple energy sources — grid, solar, DG?+
Each source is its own meter. We compute total plant kWh, source-mix percentage, and cost-per-source separately. You'll see if your DG is costing ₹18/unit while grid runs ₹9.
What about ISO 50001 audits?+
The platform's audit log + monthly reports cover most ISO 50001 evidence requirements. We're not the auditor, but we make the auditor's job faster.
Ready to see it on your own bill?
14-day free trial. No card required. Upload one bill, we'll show you the savings inside 24 hours.