Refrigeration is 85% of your bill. Every 1 °C matters.
Setpoint audits, compressor runtime analysis, defrost tuning — we cut kWh/pallet without touching your temperature contract.
Benchmarked in kWh/pallet/day · No card required
What breaks — and what we do about it
Today
Your -20 °C chamber is running at -23 °C 'just to be safe'. That extra 3 °C is 18-24% wasted electricity.
With Energy Intelligence
Setpoint audit against your contractual temperature. Right-size without risking the product.
Today
Compressor cycles too often — short-cycling wears the unit and burns kWh.
With Energy Intelligence
Runtime + cycle-frequency analytics. Suggests capacity balancing when it matters.
Today
Defrost cycles run on a fixed timer whether they're needed or not.
With Energy Intelligence
Correlate defrost energy with actual ice buildup — recommend adaptive schedules.
Today
Door open time varies wildly by shift — no data, no accountability.
With Energy Intelligence
Correlate door-open logs (if instrumented) with kWh spikes. Point at the shift, not the person.
Built for facilities
Setpoint audit
How far under your contract temperature are you running? Every degree costs you 6-8%.
Compressor efficiency
kW/TR tracked over time. Degradation shows up before the compressor fails.
Runtime & cycles
Short-cycling flagged automatically. Capacity balancing suggestions when it matters.
Temperature excursion alerts
If a chamber drifts out of spec — critical for pharma / food safety compliance — you know inside minutes.
kWh per pallet-day
The metric that matters. Benchmark across your facilities and against industry peers.
Occupancy-normalised cost
Cost per pallet doesn't spike when the warehouse is half-empty — we normalise for load.
What typical looks like
15-25% refrigeration kWh reduction typical
For a 2,000-pallet cold storage running ~₹8 lakh/month, that's ₹1.2-2 lakh/month recovered. Most comes from setpoint tightening, defrost optimisation, and finding one always-on compressor that should have been on standby.
Try it on your dataComing with our IoT hardware
Real-time monitoring, no meter walks
WeAutomate's smart contactor + temperature probes report per compressor, per chamber, per minute. Coming Q4 — auto-provisioned into this platform. This is where our IoT hardware pays back fastest.
Common questions
Won't tightening setpoints risk our product?+
We only ever recommend within your stated contractual range. If your product spec is -18 to -22 °C and you're running -25 °C, tightening to -22 °C is safe and legal — and saves 15-20%.
How do you know our compressor efficiency without a submeter?+
From your utility bill + operating hours + chamber size, we estimate kW/TR within ±5%. Sub-meters (from your side or our future hardware) push it to <1%.
We're a pharma cold chain — temperature excursions have regulatory implications.+
Our alerting is designed for it. Every excursion is logged with timestamp, duration, and delta. Exportable as an audit trail for USP <1079>, WHO PQ, or FDA inspections.
Multiple facilities across states — supported?+
Yes. Multi-state chains with 5-50 facilities are the sweet spot. State-specific DISCOMs, tariffs and PF penalty structures are all handled.
Ready to see it on your own bill?
14-day free trial. No card required. Upload one bill, we'll show you the savings inside 24 hours.